3-5 Cassettes
3-5-1 Cassette Types
This unit uses the following MPEG IMX cassettes for
both recording and playback.
MPEG IMX cassettes
Small cassettes BCT-6MX/12MX/22MX/32MX/60MX
Large cassettes BCT-64MXL/94MXL/124MXL/184MXL
The following tapes can be used for playback only.
• Digital Betacam cassettes
• Betacam SX cassettes
• Betacam SP cassettes (metal tape)
• Betacam cassettes (oxide tape)
3-12
Chapter 3 Preparations
3-5-2 Inserting and Ejecting
Cassettes
It is not possible to insert or eject a cassette unless the
unit is powered on.
Inserting a cassette
1
EJECT button
STANDBY
REW
F FWD
STOP
PLAY
1
Turn the POWER switch on.
2
Check the following points, then insert the cassette
in the orientation shown in the figure.
• Check that message "ERR-10" is not shown in
the time data/menu display section.
• Check that there is no slack in the tape.
The cassette is drawn into the unit, and the
STANDBY and STOP buttons light.
If message "ERR-10" appears in the time data/menu display
section, there is moisture condensation in the unit.
2
Small cassette
Large cassette
STANDBY button
STOP button