Table of Contents
Advertisement
Operation
1. Enter the car and close the
door completely. Move the
seat a comfortable distance
from the steering wheel, sit
straight up and well back in
the seat.
Never drive the car
with the doors ajar. The front
doors must be closed com-
pletely for the front seat belts
to function properly.
2. Turn the ignition ON. The shoulder belt buckle will move to
its rear locked position. The length of the shoulder belt will
adjust automatically to your body and seating position.
Make sure the shoulder belt goes over your shoulder and
across your body to distribute the belt's restraining force. If
the belt is too near your neck and throat, move toward the
center of the seat.
Normal movement of the shoulder belt buckle may
cause injury. Be sure all parts of your body, especially fingers
and hands, are clear of the shoulder buckle while it is moving.
CAUTION: If the sunvisor is positioned near the door area,
movement of the seat belt buckle can damage the sunvisor.
Before opening or closing a front door, turning the ignition on,
or removing the key from the ignition, make sure the sunvisor
is returned to its clip above the windshield.
NOTE:
If the door is not closed completely, the shoulder belt buckle
will not move and the door warning light will come on (see
page 26).
If the door is opened with the ignition on, the buckle will
release itself from its locked position and move forward.
If the shoulder belt buckle stops halfway or does not move
at all, see page
126
for shoulder belt buckle operation.
(cont'd)
Advertisement
Table of Contents
