Basic Scanning - Samsung ProXpress M337 series User Manual

Basic scanning

For special scanning features, refer to the Advanced Guide (see "Scan
features" on page 285).
19
Basic Scanning
This is the normal and usual procedure for scanning originals. This is a basic
scanning method for USB-connected machine.
• Accessing menus may differ from model to model.
• It may be necessary to press
some models.
• If you want to scan using the network, refer to the Advanced Guide (see
"Scanning from network connected machine" on page 286).
1 Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 59).
2 Select (scan) > Scan To PC on the control panel.
OR
For the model with a touch screen, select
touch screen.
OK to navigate to lower-level menus for
(Scan) > Local PC on the
If you see Not Available message, check the port connection, or select
Enable Scan from Device Panel in Samsung Easy Printer Manager >
Switch to advanced mode > Scan to PC Settings.
Select the scan destination you want and press OK.
3
For the model with a touch screen, press Next > select the scan
destination you want on the touch screen.
• You can create and save the frequently used settings as a profile list. Also
you can add and delete the profile and save each profile to a different
path.
• To change the scan destination go to, Samsung Easy Printer Manager >
Switch to advanced mode > Scan to PC
Select the option you want and press OK.
4
For the model with a touch screen, press
select the option you want using arrows > Start button on the touch
screen.
5 Scanning begins.
Scanned image is saved in computer's C:\Users\users name\My
Documents. The saved folder may differ, depending on your operating
system or the application you are using.
Settings.
(Option settings) >
2. Menu Overview and Basic Setup
75