Remote Control functions Power Button 30-Minute Replay Buttons Arrow Buttons Pause and replay up to 30 Select menu entries, change channels. minutes of live XM broadcast. Record Record a song or channel. Select/XM Button Press to confirm selections. Options TuneSelect, bookmarks,...
Your XMp3 radio should be placed in your vehicle where it will not interfere with the function of safety features, e.g., deployment of airbags. Failure to correctly place your XMp3 radio may result in injury to you or others, if the unit becomes detached during an accident and/or obstructs the deployment of an airbag.
Page 5
Run the cable into the trunk and then into the rear • If you placed the XM car antenna on the front of the vehicle, route the cable passenger compartment. Route the cable through the main compartment by tucking across the top of the windshield.
To remove, carefully lift the adhesive pad with your fi ngers or a spoon. Warming the pad with a hair dryer for several minutes will help soften the adhesive. You can use either the included swivel mount or vent mount for your XMp3 radio depending on your vehicle interior.
Cassette Adapter (sold separately) NOTE! If your car does not contain a cassette player or an audio input, you will need to use either the XM SureConnect (sold separately) or the FM Direct (sold separately). XM SureConnect (sold separately) Power Adapter...
2 2 Your XMp3 radio automatically scans for all available FM frequencies. NOTE: You may experience a brief delay while your XMp3 radio powers up. If you press the power button during this time, you will see a “Please Wait” message.
Vehicle Installation Set the line out level To connect the line out on the XMp3 car cradle directly to your car’s stereo to transmit audio, you can: • Use your car stereo’s audio input called “Aux In” (cable included). • Use a cassette adapter (sold separately).
2 2 Press the XM button to toggle On or Off . best reception. TIP! With your XMp3 radio in the car cradle, the remote will not be able to Select menu → Settings → Antenna Aiming. turn it on.
Press menu → Settings → Vehicle Settings → Power Off . 2 2 Press the XM button to adjust the setting. • Choose the amount of time (60, 90, 120, or 180 minutes or Off ) that should pass before the radio turns off automatically.
XM signal. This message usually goes away in a few seconds. • If you are using your XMp3 radio in your vehicle, check the 12V adapter fuse by unscrewing the ribbed end of the 12V adapter. If required, replace with a 1-amp...
Page 13
Troubleshooting If this happens: Try this No audio when listening to XM Check that your XMp3 radio and your car radio are through an FM radio tuned to the same FM frequency. Audio fades or has static when Check all cables for a fi rm and secure connection.
Product Specifi cations FCC and IC Statement Dimensions The user is cautioned that changes or modifi cations not expressly approved by XM Satellite Radio Inc. can void the user’s authority to operate this device. Car Cradle 53 mm (W) X 70 mm (H) X 35 mm (D) 2 in (W) X 2.75 in (H) X 1.37 in(D)
WARRANTY WHAT IS NOT COVERED Pioneer Electronics of Canada, Inc. (POC) warrants that XMP3 products distributed by POC in If this product was purchased from an unauthorized dealer, there are no warranties, Canada that fail to function properly within the specifi ed warranty period, under normal use express or implied, including the implied warranty of merchantability and the implied due to a manufacturing defect when installed and operated according to the owner’s manual...
(or derivative thereof ) except in compliance with applicable export laws, rules Customer Service Department and regulations. The user of this or any other software contained in an XM Radio is explicitly Pioneer Electronics of Canada, Inc. prohibited from attempting to copy, decompile, reverse engineer, hack, manipulate or...