Unpacking And Getting Ready - Kenwood K25MW10 User Manual

This microwave is designed for home use. It
should not be used for commercial catering.
1. After unpacking your microwave, check that it
has not been damaged whilst in the box. Make
sure there are no dents on the oven, and the
door closes properly. A dented or damaged
oven could allow microwave energy to escape.
Make sure that you have taken all the
packaging from inside the microwave. Please
dispose of the plastic wrappings or bags safely
and keep out of the reach of babies and young
children.
2. Choose a flat work surface for your microwave
away from heat sources such as radiators or
fires and away from cold areas.
You should allow a 10cm space all around the
oven and 30cm above so that warm air can
escape from the vents during cooking – This
microwave is not designed to be built in.
3. Plug your microwave into a standard
household electrical socket (230-240 volt, 13
amp rated).
Avoid using a socket that also has an adaptor
and other equipment plugged in. Do not use a
multi-adaptor.
4. Put the turntable ring inside the microwave
and place the glass turntable on top of the
ring. 2
The turntable is shaped to sit securely on the
spindle. You must always use the turntable
and ring whenever you use the microwave.
GB-10
Kenwood K25MW10_IB_GB_100302.indd 10

unpacking and getting ready

10cm
1
1
30cm
10cm
2
3/2/10 3:26 PM