Front Panel; Rear Panel - Panasonic DMP-BD45P Service Manual

9.1.3. Top Case
1. Remove the 2 Screws (A) and 3 Screws (B).
2. Slide Top Case rearward and open the both ends at rear
side of the Top Case a little and lift the Top Case in the
direction of the arrows.
9.1.4.

Front Panel

1. Unlock 6 tabs (A)-(F) turn. Pull with the Front Panel in the
direction of your side.
9.1.5. Power SW P.C.B. & FL P.C.B.
9.1.5.1. Power SW P.C.B. and FL P.C.B.
1. Remove the screw (A).
2. Remove the Power SW P.C.B..
3. Remove the 2 Screws (B).
4. Remove the FL P.C.B..
9.1.5.2. How to assemble Tray door ass'y.
1. Attach the Tray door spring to Tray door ass'y.
2. Attach Tray door ass'y in order from
: Insert the shaft in the hole.
: Insert the shaft in the hole.
3. Confirm the Tray door spring is attached as following.
9.1.6.

Rear Panel

1. Remove the 4 Screws (A) and Screw (B).
2. Unlock 2 locking Tabs (A) to remove the Rear Panel.
28
to .