Mounting
1 Align (ñ) with the shooting direction, and mount the camera
onto the ceiling
Mounting screw (not included)
Note
The diameter of the attachment hole is Φ 4.5 mm (3/16 inch).
Do not use flathead screws.
When using an impact screwdriver, do not tighten the screws fully.
Tighten using your hand instead. Failure to do so may damage the
outer case.
.
Adjusting images
After mounting is completed, adjust the images while checking the actual image.
"Adjusting Image" (A page 17)
.
Installation
15