Ilink/Timer - JVC I'Art 1003-TN-II-IM User Manual

iLINK/Timer

iLINK Timer has four menus - Timer, Timer List, Controller and Device.
By connecting a D-VHS VCR with an iLINK cable, you can set the timer easily.
Notes:
• If the iLINK is not connected, "Controller" and "Device" will not appear.
• The iLINK/Timer function will only work when you are receiving digital programming only.
• Before you set the timer, connect the D-VHS VCR with the iLINK cable and select the device.
See pages 22 and below.
• When you have set the timer, don't insert or disconnect the iLINK cable.
Device
To operate the iLINK timer and controller, select the D-VHS device.
Press the i
è
To Device
Timer
i.LINK
Device Selection
1 D-VHS 1
2 D-VHS 2
Select
π †
To select your device connecting with iLINK
Press the OK button
A moves to the selected D-VHS number
Timer
i.LINK
Device Selection
1 D-VHS 1
2 D-VHS 2
Select
Notes:
• If you do not select the device, you cannot use the iLINK timer functions.
• If the iLINK is not connected, this OSD and selected device will not appear.
• Even if you disconnect one device, it is still listed here. If you want to remove the device from
the list, select "Renumber". The list will now only show devices that are connected.
Button Functions - Digital
/T button
LINK IMER
Timer List Controller Controller
JVC
JVC
OK BACK
Operate
Timer List Controller Controller
JVC
JVC
OK BACK
Operate
Device
Renumber
HM-DH30000
HM-DH40000
i.LINK/TIMER
Back Exit
Device
Renumber
HM-DH30000
HM-DH40000
i.LINK/TIMER
Back Exit
69