Multi Media Card (Mmc) / Secure Device (Sd) Card - Motorola MC909X Integrator Manual

2 - 4 MC909X Integrator Guide

Multi Media Card (MMC) / Secure Device (SD) Card

The MMC provides secondary non-volatile storage. The MMC is located under the keypad (see
NOTE SD cards are inter-operable with MMC cards and can also be used in MC909X mobile computers.
MC909X with Windows Mobile 5.0 with OEM Version 01.39.0001
MC909X with Windows CE 5.0 with OEM Version 01.26.0001.
CAUTION
To insert the MMC/SD card:
Press the Power button to suspend the mobile computer.
1.
Remove the two keypad screws and slide the keypad down and lift off (see
2.
Lift the MMC/SD retaining door.
3.
Position the MMC/SD card, with the contacts down, into the MMC/SD holder. The MMC/SD card corner notch
4.
fits into the holder only one way.
Snap the retaining door closed.
5.
MMC/SD Retaining Door
Inserting the MMC/SD
Figure 2-3
CAUTION
Replace the keypad and re-attach using the two screws (see
6.
Perform a warm boot.
7.
Do not remove the keypad while the mobile computer is on and do not operate the mobile computer with
the keypad detached. Follow proper ESD precautions to avoid damaging the MMC/SD. Proper ESD
precautions include, but are not limited to, working on an ESD mat and ensuring that the operator is
properly grounded.
MMC/SD
Do not apply more than 4 in-lbs of torque when tightening the keypad screws.
Figure 2-1 on page
Figure 2-2 on page 2-3).
Figure 2-1).
2-3).