Table of Contents
Advertisement
Interface Definition
The DAP-3860 currently provides two interfaces at the bottom, which are PoE & Data with a black plastic
cover and RS-232 with a light gray cover that labed "WARNING! No PoE". Among which, a black RJ45
waterproof connector will be provided for the PoE + Data interface.
Figure 9 Interface Definition
RS-232
RS-232, which is labeled COM/RESET, is used for debugging purposes as well as for hard reset of the
DAP-3860. Below you may find the pin definition of the RS-232.
Chapter 2 Hardware Installation
19
Advertisement
Table of Contents
