Connecting The Am (Mw) And Fm Antennas - JVC SP-WA75 Instructions Manual

Getting started

Connecting the AM (MW) and FM antennas

• Make sure the antenna conductors do not touch any other terminals, connecting cords, and power cords. This could cause
poor reception.
7 AM (MW) loop antenna
Setting up AM (MW) loop antenna
Attach the AM (MW) loop to its base by snapping the tabs on the loop
into the slot in the base.
If the antenna cord is covered with vinyl, remove the
vinyl by twisting it as shown.
Single vinyl-covered wire (not supplied)
If reception is poor:
Connect a single vinyl-covered
wire to the AM EXT terminal
while keeping the AM (MW) loop
antenna connected.
FRONT SPEAKERS
SUBWOOFER RIGHT
8
AM (MW) loop
antenna
Wire
CENTER SURROUND SPEAKERS SURROUND BACK
LEFT SPEAKER RIGHT LEFT SPEAKER
CAUTION:SPEAKER IMPEDANCE 4 16
Connecting AM (MW) loop antenna
1
2
3
VCR AUDIO IN
R L
VCR IN STB IN OUT
VIDEO
RGB Y/C
AV COMPU
S-VIDEO
LINK-
Press and hold the
terminal clamp.
Insert the antenna
cord.
Release your finger
from the clamp.
• Turn the loop until
you have the best
reception.
STB
FM 75
AM LOOP
R L
DIGITAL IN
(STB)
AM EXT
COAXIAL
ANTENNA
AV