Changing The Vfp Setting; Still Picture - JVC SP-PWC3 Instructions Manual

Advanced operations
Selecting browsable still picture recorded
on DVD AUDIO
Most DVD AUDIOs include browsable still pictures
(B.S.P.), which usually appear by turns automatically
during playback according to the playback sequence. You
can change the picture (turn the page) manually when the current
group/track has selectable pictures (pages).
7 During playback and while the B.S.P. indicator lights up on the
display window
When using the PAGE button:
Press PAGE repeatedly to select a desired

still picture.

When using the on-screen bar:
1
Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2
Press Cursor 3/2 to highlight
3
Press ENTER.
Dolby D
2/0 . 0ch
4
Press Cursor 5/Y to select the desired
still picture.
5
Press ENTER.
6
Press ON SCREEN.
The on-screen bar disappears.
Zooming in
7 During playback or while paused
1
Press ZOOM.
Each time you press ZOOM, scene
magnification changes.
2
While zoomed in, press Cursor 3/2/Y/
5 to move zoom-in area.
To return to normal playback
Press ZOOM repeatedly to select ZOOM OFF.
NOTE
• The number of the magnification steps varies depending on the disc
type.
• During slide-show playback of JPEG, zooming in is not available. In
such a case, press 8 to pause slide-show playback, then zoom in.
• During DVD AUDIO playback, this feature is available only for the
video part.
• During playback, there may be a case where Cursor (3/2/Y/5)
does not work in step 2 above.

Changing the VFP setting

The VFP (Video Fine Processor) function enables
you to adjust the picture character according to the
DVD type of programming, picture tone or personal
AUDIO
preference.
7 During playback
1
Press VFP.
The current VFP settings appear on the TV screen.
Example:
2
Press Cursor 3/2 repeatedly to select
.
the VFP mode.
• NORMAL: Normally select this.
• CINEMA: Suitable for movies.
When you select "NORMAL" or "CINEMA", press VFP to
complete the setting.
• USER 1 and USER 2:
Only when selecting "USER 1" or "USER 2" in step
2, proceed to perform the following operation;
3
Press Cursor Y/5 repeatedly to select
a parameter you want to adjust.
Adjust gradually and confirm picture appearance results are as
preferred.
• GAMMA:
DVD DVD DVD
VR
VIDEO AUDIO
• BRIGHTNESS:
• CONTRAST:
• SATURATION:
• TINT:
• SHARPNESS:
4
Press ENTER.
Example:
5
Press Cursor Y/5 to change the
setting.
6
Press ENTER.
The current VFP settings appear again.
7
Repeat steps 3 to 6 to adjust other
parameters.
8
Press VFP.
NOTE
• Although the setting display disappears in the middle of the
procedure, the setting at that time will be stored.
See page 21 for button locations.
You can adjust parameters that affect picture
appearance.
Controls brightness of neutral tints while maintaining
brightness of dark and bright portions.
Controls screen brightness.
Controls screen contrast.
Controls screen color depth.
Controls screen tint.
Controls screen sharpness.
DVD DVD DVD
VR
VIDEO AUDIO
28