Fluid Change - Polaris 2014 Sportsman 570 EFI Owner's Manual

Front Gearcase (Demand Drive) Fluid
Always check and change the demand drive fluid at the intervals
outlined in the Periodic Maintenance Chart beginning on page 76.
Maintain the fluid level at the bottom of the fill hole threads. See page
130 for the part numbers of POLARIS products.
Fluid Recommendations
Gearcase
Front
Gearcase
The fill plug is located on
the right side of the demand
drive unit. The drain plug is
located on the bottom right
side of the unit.
Fluid Check
1. Position the vehicle on
a level surface. Remove
the fill plug. Check the
fluid level.
2. Add the recommended demand drive fluid as needed to bring the
level to the bottom of the fill hole threads.
3. Reinstall the fill plug. Torque to 8-10 ft. lbs. (11-14 Nm).

Fluid Change

1. Position the vehicle on a level surface. Remove the fill plug. Place a
drain pan under the demand drive unit.
2. Remove the drain plug. Allow the fluid to drain completely.
3. Clean and reinstall the drain plug. Torque to 11 ft. lbs. (15 Nm).
4. Add the recommended fluid. See page 87 for capacity. Maintain the
fluid level at the bottom of the fill hole threads.
5. Reinstall the fill plug. Torque to 8-10 ft. lbs. (11-14 Nm).
6. Check for leaks. Dispose of used fluid properly.
Lubricant
Demand Drive Fluid
Fill Plug
MAINTENANCE
Capacity
9 oz.
(265 ml)
Fill Level
Fill Plug Drain Plug
Torque
Torque
8-10 ft. lbs. 11 ft. lbs.
(11-14 Nm) (15 Nm)
Drain Plug
87