iSCSI Storage Device Setup Procedure
Step 6. Removing iSCSI Disk
Describes how to remove the iSCSI Disk from recognition of the NSR-500 such as
when you wish to stop recording on it.
1.
2.
Issue: Jan/26/2009
Revised: 2013/10/17 ©2013 Sony Corporation
Stop recording. (For details, refer to the NSR-500 User's Guide.)
(1) Logon to the NSR-500. (Refer to Step 3.)
(2) Stop recording.
[Alarm recording/Schedule recording]
Click
at the right top of the main screen to open the configuration window.
Click [Schedule] tab, and select the target camera where recording is being performed.
Click on the schedule view, and click [Edit] button.
(You can delete the schedule itself by clicking [Delete] button at this timing.)
On the Schedule Configuration dialog box, unselect [Enable] check box.
[Manual recording]
Click on any monitor frame on the main screen.
Click [Stop Recording] button on the playback control pane in the right frame to stop
manual recording.
Changing the storage assignments for camera
(1) Click
at the right top of the main screen to open the configuration window.
(2) Select [Server]->[Storage Assign] tab.
(3) Change the recording type which was assigned to the iSCSI Disk to "Default" or
other storage.
(4) Click [Apply] button.
Change the recording type
to "Default" or other
16
NSR-1000 series
NSR-500 Series