Getting Started - JVC LT-42SZ58 Instructions Manual

Getting started

Please read P. 7 - 11 of this manual to set up your TV.
Check accessories
Remote control
RM-C1940
Cleaning cloth
(For details on using the
cleaning cloth, see P. 5.)
Stand, stand cover, screws and plates are also included. For details, refer
to page 5.
Install your TV
Follow the instructions on page 5 to attach the stand provided to the TV.
Place the TV on a flat and stable location.
Power requirements
Connect the power cord only to a 110 - 240 V, 50/60 Hz AC outlet.
When attaching the TV to the wall, use the optional JVC wall mounting unit
Consult a qualified technician.
See the included manual on mounting procedures.
JVC assumes no responsibility for damage due to improper mounting.
Mounting holes for wall mounting unit:
M6 x 4, 400 mm x 200 mm
Depth of screw hole is 10 mm from the surface of the TV.
Seal up the two holes at the bottom of the TV with the plates provided.
(P. 5)
ENGLISH
"AAA/R03" Batteries
(For confirming the TV
works)
WARNING:
Batteries shall not be exposed to
excessive heat such as direct
sunshine, fire or the like.
Installation requirements
To avoid overheating, ensure the unit has ample room.
150 mm 50 mm
To prevent the TV from falling, thread the belt through the hole on the back
of the stand and secure it to the TV rack, etc.
Belt and screw (not provided)
Insert the batteries
Use two "AAA/R03" dry cell batteries. Insert the batteries from the - end,
making sure the + and - polarities are correct.
200 mm
150 mm 50 mm
Hole
If this symbol is shown,
it is only valid in the
European Union.
6