Initial Setup Menus
Digital Sound
You can select the optical digital sound output, either PCM or DOLBY DIGITAL when your TV
is connected to an amplifier that has DOLBY DIGITAL decoder. If you select DOLBY DIGITAL,
you can enjoy listening in 5.1ch sound when watching digital broadcasts.
Press the M
To DIGITAL SETUP
π †
è
To enter
To Digital Sound
π †
è
To select PCM or DOLBY DIGITAL
Press the M
Notes:
• If your amplifier does not have DOLBY DIGITAL decoder, select PCM. If you don't select
PCM, it cannot output the sound from the speakers.
• For connecting an amplifier using the optical output, see page 20.
Software Version
You can confirm the Software Version.
Press the M
To DIGITAL SETUP
π †
è
To enter
To Software Version
π †
è
To enter
Press the O
Press the M
48
button
ENU
button when finished
ENU
Manufactured under license from Dolby Laboratories. "Dolby", and
the double-D symbol are trademarks of Dolby Laboratories.
button
ENU
button when you are finished confirming your software version
K
button when finished
ENU