C3
Tyres inflated to correct pressures.
Vehicle at reference height.
Steering rack locked at mid point (See corresponding operation).
E1AP09MD
Front height
H1 = R1 - L1
H1 = Measurement between the measuring zone underneath the front
subframe and the ground.
R1 = Front wheel radius under load.
L1 = Distance between the wheel axis and the measuring zone under-
neath the front subframe.
Conditions for checking and adjusting
Vehicle heights at reference height
L1
AXLE GEOMETRY
H2 = Measurement between the measuring zone underneath the rear sill
and the ground.
R2 =Rear wheel radius under load.
L2 = Distance between the wheel axis and the measuring zone under-
neath the rear sill.
326
Rear height
L2
H2 = R2 + L2