Removing A Sim Card; Charging The Battery - NEC Mobile Phone User Manual

Table of Contents

Advertisement

Removing a SIM card

Be sure to turn the phone off before removing a SIM card.
Pick up the bump and lift the SIM card compartment cover gently in the direction of the arrow (STEP 1).
Be careful not to pull out the cover too much. This may cause the SIM card compartment cover to break apart.
Slide the SIM card with your finger for a few millimeters and pull the SIM card out of the slot gently in the direction of
the arrow (see the figure on the right).
Be careful not to damage electric parts of the SIM card compartment when removing a SIM card.
Slide the cover in the direction of the arrows (STEP 4) until the two tabs fit properly inside the cover (STEP 5).
Close the cover in the direction of the arrows until the four tabs are locked in the cavities and click (STEP 5 and STEP 6).

Charging the battery

Make sure to hold the charger plug with the arrow
marks facing up and press both buttons.
Before trying to use your phone, connect the NEC battery charger (AC adapter) supplied with your phone to a suitable mains power socket.
With the arrow marks of the charger plug facing up, hold the buttons on both sides of the charger plug with your thumb and index finger.
Press the buttons as indicated by the arrow marks on the charger plug and insert the plug into the charger connector.
Make sure to insert the charger plug with the arrow marks facing up. Otherwise, damage to the charger connector can occur when disconnecting the
charger plug.
If your phone is turned on and charging starts, the battery charging icon will be displayed. LED will turn on in red while charging. When charging is complete, the
LED will turn off.
You are recommended to switch off the phone while charging. If you need to receive calls, your phone can be switched on and left in standby while being charged,
although the total time taken to charge is then increased.
After the charging is complete, press the buttons of the charger plug as indicated by the arrow marks on the charger plug (➀) and gently pull straight out of the
charger connector (➁).
Make sure to press both buttons when disconnecting the charger plug from the charger connector. If you pull the charger plug forcibly without pressing
the buttons, damage to the charger connector can occur.
Charger connector
Press
Press
Charger plug
Arrow marks
Charger connector
Press
Press
Charger plug
Pull straight
Make sure to press both buttons and gently pull
the charger plug straight.
3
Getting Started

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents