Table of Contents
Advertisement
Weak Signal
This OSD appears when the digital channel that you have selected is too weak to receive or no
signal is being detected for that channel.
No Program
It appears when that channel is not receiving a signal and you have the Noise Muting function
OFF and you have a single screen. It moves automatically every two seconds to prevent the
screen from burn-in.
Notes:
• Even if "NO PROGRAM" appears on the screen, your timer functions and auto shut off
functions that you set, are still active.
• If you are watching an analog channel, NO PROGRAM does not appear.
Invalid Signal
If you are inputting a PC signal that is invalid, "Invalid Signal" will appear on the TV screen. It
appears when the input is PC and it is a single screen.
OSD Information
Weak Signal
0
75
Advertisement
Table of Contents
