How To Use Your Blowernac; Stopping Your Engine; Throttle Control Group; Primer Bulb - Craftsman 358.798980 Operator's Manual

HOW TO USE YOUR BLOWERNAC

STOPPING YOUR ENGINE

• Move ignition switch to the "STOP" position.
• If engine does not stop, turn choke knob to full.
THROTTLE CONTROL GROUP (Fig. 9
THROTTLE TRIGGER
• The throttle trigger allows for variable control of engine
speed.
• The throttle trigger is actuated by the index finger on your
right hand.
THROTTLE LOCK
• The throttle lock allows for faster engine speeds during
starting.
• The throttle lock is engaged by the following steps:
- Grasp the top handle and squeeze the throttle trigger
fully and hold.
- Depress the throttle lock with your thumb and hold.
- Release your grip on the throttle trigger while continu-
ing to hold the throttle lock,
NOTE - Verify the throttle trigger stays in the advanced
position.
Figure 9
OPERATION

PRIMER BULB

• The primer bulb is used to circulate fuel to the carburetor.
• The primer bulb is activated by pressing on it with your
thumb.
CHOKE
• The choke provides additional fuel when starting a cold
&
10)
engine.
• The choke is actuated by turning the choke knob.
• The choke has three positions: Off" half and full.
-10 -
10
Figure