Assembling The Complete Crankshaft - Husqvarna 555 XP Workshop Manual

7.25 Assembling a complete crankshaft
1
Fit the complete crankshaft in the crankcase.
Fit the following parts:
• The piston and cylinder *
• The fuel unit *
• The handle system *
• The muffler *
• The hand guard *
• The bottom of the carburettor *
• The carburettor *
• The flywheel *
• The starter *
• The cylinder cover
• The centrifugal clutch *
• The chain and bar.
• The clutch cover
* See specific instruction.
Repair Instructions
53
English -