Recording Features - JVC DR-MH20S Instructions Manual

Dvd & hdd video recorder
Hide thumbs Also See for DR-MH20S:
Table of Contents

Advertisement

BASIC OPERATIONS ON DVD DECK
38
EN

Recording Features

Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/CABLE/DBS/DVD switch to DVD.
Press DVD so that the DVD lamp lights up on the unit.
TV AV/ VIDEO
DISPLAY
DVD
7
CABLE/DBS
TV
DVD
DVD
CH+/-
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the unit off after
recording is finished.
1
Press 7 on the unit to start recording.
2
Press 7 again to engage the ITR mode.
On the front display panel, "0:30" appears.
3
If you want to record for more than 30 minutes, press 7 to
extend the time. Each press extends recording time by 30 minutes.
NOTES:
You can only perform ITR using the 7 button on the unit.
When the recording capacity becomes full during timer recording or
Instant Timer Recording, the unit automatically performs "Relief
Recording" (
pg. 48).
Watch Another Program While Recording On The Unit
While recording is going on, you can watch another program on the
TV by using the TV's tuner.
NOTE:
It is required that the remote control is set to be able to operate the TV
in advance. (
pg. 64)
1
Slide the TV/CABLE/DBS/DVD switch to TV.
2
Press CH +/– repeatedly to select the desired channel.
Elapsed Recording Time And Disc Remaining Time
Indication
During recording, press DISPLAY repeatedly until the desired
indication appears on the front display panel.
Each time you press DISPLAY, the time indication changes as
follows:
Elapsed recording time ] Disc remaining time ] Clock ] (Back to
the beginning)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dr-mh30s

Table of Contents