JVC 0503-AH-ID-JVE Instructions Manual page 93

Fine-Tuning Channels Already Stored
Perform steps A and C of "Manual Channel Set" on page 90
to access the Confirmation screen before continuing.
A
Select the channel to fine-tune.
Press until the channel you want to tune begins
w r e t
blinking.
B
Access the Manual Channel Set screen.
Press OK twice. The Manual Channel Set screen appears.
C
Perform tuning.
Press until "+/–" begins blinking, then press
e
the picture is its clearest. Then press OK.
The Confirmation screen appears.
Repeat steps A – C as necessary.
D
Close the Confirmation screen.
Press MENU.
When Receiving A Scrambled
Broadcast
A
Select the decoder mode.
Set "L-2 SELECT" to "DECODER" (
B
Access the Confirmation screen.
Perform steps
page 90.
C
Select the position.
Press
w r e t
broadcasting scrambled programmes, then press OK
until
rt
twice.
D
Change the decoder setting.
Press until "OFF" (decoder setting) begins blinking,
e
and set it to "ON" by pressing
E
Return to the Confirmation screen.
Press OK.
Repeat steps C – E as necessary.
F
Close the Confirmation screen.
Press MENU.
INFORMATION
If you live in Eastern Europe, "TV SYSTEM" setting appears
instead of "DECODER" setting on the Manual Channel Set
screen. When you can see the picture but can hear no audio,
select appropriate TV system (D/K or B/G). Normally, TV
programmes are broadcasted as follows.
For Eastern Europe : D/K
For Western Europe : B/G
A Select a country in Eastern Europe in step E on page 88.
B Press
Manual Channel Set screen in step E on page 90.
C Press
A C
and of "Manual Channel Set" on
to select the channel position
rt
until the TV system (D/K or B/G) blinking on the
e
to select appropriate TV System (D/K or B/G).
rt
93
EN
pg. 69).
.