Turn Your Phone On And Off - Sharp AQUOS Crystal User Manual

micro USB plug.
2. Insert the USB plug on the micro USB cable for PC into the USB port on your computer.
After charging is complete, the LED goes out.
Make sure that the LED glows red (when the battery is almost fully charged, it glows green).
l
3. After charging, remove the micro USB cable from both the phone and the computer.

Turn Your Phone On and Off

The instructions below explain how to turn your phone on and off.
Turn Your Phone On
Press and hold the Power key until the screen displays "SHARP".
n
Your phone will power on. Depending on the settings, you may see the lock screen.
When using the phone for the first time, be sure to charge it first before turning it on. If the
l
battery level is low, the phone may not turn on.
See Lock and Unlock Your Screen and Screen Lock for information about using the screen
l
lock.
The first time you turn the phone on, you will see the startup screens. See Complete the
l
Setup Screens for details.
If your phone is not yet activated, see Activate Your Phone for more information.
l
Turn Your Phone Off
1. Press and hold the Power key to open the phone options menu.
Get Started 18