Co Line Access Codes - Toshiba Strata DK14 System Administrator Manual

Access Codes
This appendix contains access codes for outside Speed Dial numbers, CO lines, Paging
Group and Paging Zone Codes.

CO Line Access Codes

CO lines are used when you dial an outside number. If your telephone does not have a
/LQH
or button, you can enter the appropriate code listed in
line.
You can also store the code on a Speed Dial (
storing a CO line access code onto a Speed Dial code, enter
(e.g., to store code
In some systems,
System users are required to dial
system programmed with LCR, you may not hear internal dial tone, depending on system
programming.
See your System Administrator for the code which applies to your telephone.
To access a line
Strata DK System Administrator's Guide 4/99
 
, enter
is used as a general group code or to access Least Cost Routing (LCR).
in order to access an outside line. If you press
Table 5
6'
) button for one-touch access. If you are

before the CO access code
).
A
&2
to access an outside
in a
33