Removing And Replacing The Polyphonic Speaker Assembly - Motorola V300 Service Manual

Disassembly

Removing and Replacing the Polyphonic Speaker Assembly

32
1. Remove the battery cover, battery, SIM, antenna, rear housing, and headphone
speaker connector as described in the procedures.
2. Use the disassembly tool to pry the polyphonic speaker assembly out of the
rear housing as shown in Figure 13.
3. Remove any remaining speaker adhesive residue from the rear housing
assembly.
Figure 13. Removing the Polyphonic Speaker Assembly
4. To replace, remove any remaining adhesive residue from speaker cavity.
5. Remove any adhesive protection material from the speaker assembly.
6. Align the speaker assembly to the opening in the rear housing.
7. Carefully press the polyphonic speaker assembly into it's cavity on the rear
housing.
8. Replace the headphone speaker connector, rear housing, antenna, SIM,
battery, and battery cover as described in the procedures.
September 30, 2003
Rear Housing Assembly
Disassembly
Tool
V300/V500
Polyphonic Speaker
6809468A80
031837o