BEFORE YOU CALL FOR SERVICE
Check these
points
if...
Metal
markings
appear
on the
ceramic
glass
cooktop
(select
The cooktop
does
not
operate
models)
• Are any house fuses blown or circuit breakers
• Were metal pans slid across the cooktop,
tripped?
especially aluminum.
• Is the cooktop properly connected to an
electric circuit in the house?
Brown
streaks
and/or
areas
of
discoloration
with
a metallic
The cooktop
elements
do not get
sheen
appear
on the ceramic
glass
hot enough
cooktop
(select
models)
• Are the snrfaee controls properly- set?
• Were/hod
boilovers burned into the cooktop?
• Is the voltage to the house low?
• Were the bottoms of the pans clean to avoid
• Is the eool_vare bottom FLAT and not
soil transfer to the cooktop?
oversized?
• Was water with hard water minerals allowed
to evaporate on eooktop?
The elements
emit
a slight
odor
* Were correct cleaning products used to dean
and/or
smoke
when
first
turned
on
cooktop? (no ehlorine bleach, ammonia, rest
• This is normal,
removers, oven cleaners)
lliny
scratches
or abrasions
appear
Chipping
of the ceramic
glass
on the ceramic
glass cooktop
surface
(select
models)
(select
models)
• Was a sugar solution, plastic or aluminum foil
• Is the surface free of coarse particles of sugar,
allowed to remain on a hot eooktop surface?
dust, salt, etc. before you placed the pan on
the surface?
For further
assistance
contact your Maytag
• Were proper cleaning products used when
dealer
or call Maytag Customer
Serviee:
cleaning the surface?
U.S.
1-800-688-9900
• Was glass cool.rare used?
CANADA
1-800-688-2002
• Were pans with rough bottoms used on the
cooking surface?
Circuit
Breaker
e
Canadian
Appliance
Only
Your appliance is equipped with a circuit breaker
box. The box is located either on a wall or in a
cabinet next to or near the appliance. If part or
_
e
all of the appliance does not operate, cheek to
see if one of the breakers has tripped. Reset the
breaker to the ON position.
[
I
O
4 BREAKER BOX
i
PAGE 12