Channel Set-Up - Sony Bravia KDL-40BX420 Operating Instructions Manual

Channel Set-up

Analogue Set-up
26
GB
"Analogue Auto Tuning": Tunes in all the available analogue channels. Usually you
do not need to do this operation because the channels are already tuned when the TV
was first installed. However, this option allows you to repeat the process (e.g., to retune
the TV after moving house, or to search for new channels that have been launched by
broadcasters).
"Manual Programme Preset": Changes the available analogue channel setting.
Press to select the programme you want to modify.
Programme/TV System
Presets programme channels manually.
F f
1
Press / to select "Programme", then press
F f
2
Press / to select the programme number you want to manually tune (if tuning a
VCR, select programme 0), then press
F f
3
Press / to select "TV System", then press
F f
4
Press / to select the best received TV broadcast systems, then press
• Depending on the country/region selected for "Country", this option may not be available.
Channel
F f
1
Press / to select "Channel", then press
F f
2
Press / to select "S" (for cable channels) or "C" (for terrestrial channels), then
g
press .
3
Tune the channels as follows:
If you do not know the channel number (frequency)
F f
Press / to search for the next available channel. When a channel has been found,
the search will stop. To continue searching, press
If you know the channel number (frequency)
Press the number buttons to enter the channel number of the broadcast you want or
your VCR channel number.
4
Press to jump to "Confirm", then press
Repeat the procedure above to preset other channels manually.
Label
Assigns a name of your choice, up to seven letters or numbers, to the selected channel.
AFT
Allows you to fine-tune the selected programme number manually if you feel that a
slight tuning adjustment will improve the picture quality.
Audio Filter
Improves the sound for individual channels in the case of distortion in mono broadcasts.
Sometimes a non-standard broadcast signal can cause sound distortion or intermittent
sound muting when watching mono programmes.
If you do not experience any sound distortion, we recommend that you leave this option
set to the factory setting "Off".
Skip
Skips unused analogue channels when you press PROG +/– to select channels. (You
can still select a skipped channel using the number buttons.)
Confirm
Saves changes made to the "Manual Programme Preset" settings.
"Programme Sorting": Changes the order in which the analogue channels are stored
on the TV.
F f
1
Press / to select the channel you want to move to a new position, then press
F f
2
Press / to select the new position for your channel, then press
.
.
.
.
F f
/ .
.
.
g
.
.