Mc319Z Rfid Mobile Computer Leds; Reading Tags - Motorola MC319Z RFID Integrator Manual

MC319Z RFID Mobile Computer LEDs

The mobile computer LEDs indicate charging and reader status as described in
LED Status Indicators
Table 1-1
LED
Charging Indicators
Off
Fast Blinking Amber
Slow Blinking Amber
Solid Amber

Reading Tags

To read RFID tags:
Remove the MC319Z from AC power and ensure the LLRP icon is green.
1.
NOTE When connected to power, the mobile computer cannot read RFID tags.
Use an RFID reader application to enable tag reading. For a sample application, browse to the MC319Z
2.
directory and select
Application
Aim the mobile computer at the tag, oriented horizontally or vertically depending on the tag orientation. The
3.
distance between the tag and the antenna is the approximate read range.
Press the trigger or tap the on-screen
4.
the radio frequency (RF) field of view and capture data from each new tag found. Release the trigger or tap the
command to stop interrogating tags.
Stop Read
Mobile computer not placed correctly in the cradle; cable not connected correctly;
charger is not powered.
Error in charging; check placement of mobile computer.
Mobile computer is charging.
Charging complete.
Note: When the battery is initially inserted in the mobile computer, the amber LED
flashes once if the battery power is low or the battery is not fully inserted.
RFIDSample3Plus.exe
command within the application to interrogate all RFID tags within
Read
Table
Indication
. See Chapter 4, RFID Sample
Getting Started 1 - 5
1-1.
Application.