Epson MR Series Technical Reference Manual page 236

1. Remove the exfoliation paper attached with double-coated electric-conductive tape on the
upper plate and lower plates. The illustration below shows the position of the exfoliation
paper.
2. Place the upper plate and the lower plate on the front panel unit, moving them to the center
to align the position of the screw holes.
lower plate (121)
3. Attach the plates to the front panel unit with the 4 screws (S05).)
9-20 Disassembly and Assembly
screw (S05)
front panel unit
upper plate (120)
screw (S05)
exfoliation paper
Rev. I