Connecting To Terrestrial Tv; Inserting Smartcard; Connecting To Power - Motorola VIP 1903 Installation Manual

CONNECTING TO TERRESTRIAL TV

(MODEL T ONLY)
Connecting to terrestrial TV
Some models are prepared to receive digital terrestrial TV (VI-
P19x3T).
Connect one end of an RF cable to the RF-IN connector and the
other end to the antenna outlet in your home.
For information on how you proceed with the channel search and
scanning, please see separate instructions from your operator.
Digital TV
outlet/Antenna
OPTIONAL ON SOME MODELS:
INSERTING A SMARTCARD
If you have received a smartcard
to enable access to the TV signals,
fully insert it in the smartcard slot
on the side of the set-top box to
make it in line with the casing. The
chip on the smartcard should be
directed downwards and towards
the set-top box.
12

CONNECTING TO POWER

Connecting to power
When all other cables are connected, connect the power cord to
the power connector on the set-top box and to mains power.
NOTE:
Do not use an AC adaptor other than
the one that is supplied with the
product. Doing so may cause fire or
seriosly damage the set-top box.
13