Film Loading And Winding - Honeywell ESII User Manual

FILM LOADING AND WINDING

1.Open the back by pulling
out the rewind knob until
the back cover snaps open.
4. Cock the rapid wind lever,
and confirm that the film
rewind knob automatically
turns counter-clockwise, in-
dicating that the film is
properly loaded and is mov-
ing from cassette to take-up
spool. Trip the shutter.
2. Place the film cassette pro-
perly into the
chamber, and push down
the rewind knob. Insert the
film leader into the slot of
the take-up spool.
5. The first portions of the film cannot be used for picture taking
as they have already been exposed to light. Generally, two or
three blank exposures should be made before taking your first
picture. In this case, be sure to set the shutter dial at "1000".
Advance the film until the exposure counter turns to " 1 " ,
indicating that the first picture is ready to be taken.
Avoid direct light when loading your film.
3. Advance the film by alter-
cassette
nately turning the rapid
wind lever and depressing
the shutter button
both sprockets engage the
film perforations properly.
Close the back by pressing
it firmly.
until
8