Advertisement
Quick Links
Aluminum Hardtop Gazebo
Assembly Instructions
Model: Victoria Pavilion
ltem:
ZYG11-6
Thank you for your purchase of the Victoria Pavilion hardtop gazebo. Please take time to
read the enclosed instructions thoroughly and follow each step carefully to ensure the safe
installation of your hardtop gazebo. Keep this manual in a safe place for future reference.
For technical support or missing parts, contact Zenith industries, LLC at 1-855-6ZENITH
or service@zenithindllc.com.
Advertisement
Summary of Contents for Zenith Victoria Pavilion
- Page 1 ZYG11-6 Thank you for your purchase of the Victoria Pavilion hardtop gazebo. Please take time to read the enclosed instructions thoroughly and follow each step carefully to ensure the safe installation of your hardtop gazebo. Keep this manual in a safe place for future reference.
- Page 2 ALUMINUM HARDTOP GAZEBO ASSEMBLY INSTRUCTION Note: THIS UNIT IS HEAVY! For safety, Do NOT assemble this item alone. six people are recommended for a safe assembly. A screw driver, hammer, two ladders (not included) with height no less than 2.5m are needed to install. For ease of identification when installing, all parts are labeled. This product takes at least two hours to set up.
- Page 3 ALUMINUM HARDTOP GAZEBO ASSEMBLY INSTRUCTION Long right Long left A1 (x2) B1 (x2) decorative beam decorative beam Short right Short left C1 (x2) D1 (x2) decorative beam decorative beam Middle beam E1 (x4) G1 (x4) Corner connector connector Middle beam of big A2 (x4) Top slanting bar B2 (x2)
-
Page 4: Hardware Pack
ALUMINUM HARDTOP GAZEBO ASSEMBLY INSTRUCTION Left roof cover of Right roof cover of E5 (x2) F5 (x2) long side 3 long side 3 Roof cover of Left roof cover of G5 (x2) H5 (x2) short side 1 Short side 2 Right roof cover Left roof cover of I5 (x2) - Page 5 ALUMINUM HARDTOP GAZEBO ASSEMBLY INSTRUCTION Hardware Pack 2 1/4" - 20×1 hex bolt 8 PCS 72 PCS 1/4" - 20×0.6 hex bolt 16 PCS 1/4" - 20×0.6 bolt 32 PCS 1/4" - 20×2.125 bolt 16 PCS 1/4" - 20 hexagon nut 16 PCS BB AA Fig.5: Attach the Top short panel (M2) to the Top long panel (L2) with bolts (AA) &...
- Page 6 ALUMINUM HARDTOP GAZEBO ASSEMBLY INSTRUCTION Hardware Pack 3 1/4" - 20×0.6 bolt 4 PCS 1/4" -20 hexagonal capped 8 PCS Fig.11: Insert the Long side support bar (E3) & short side support bar (F3) into the corner pipe of bottom beam of small top (A3 &...
- Page 7 ALUMINUM HARDTOP GAZEBO ASSEMBLY INSTRUCTION Fig.18 Fig.17 Fig.19 Fig.16 Fig.20 Fig.21 Fig.21-1 Fig.15 Fig.15: Lift the Base protector (B4), attach the post base (A4) to the post (C4) with bolts (DD) & washers (BB). Fig.16: Attach the top block (D4) to the post (C4) with bolts (CC) & washers (BB). (Note: the screw holes on the post and the screw holds for installing the block plate (E4) should be in the same direction as shown in the figure) Fig.17: Lift the assembled pavilion roof and attach the assembled posts to the corners of the roof with bolts...
- Page 8 ALUMINUM HARDTOP GAZEBO ASSEMBLY INSTRUCTION Hardware Pack 5 66PCS 1/4" - 20×0.6 bolt 58 PCS 1/4" - 20×1.6 bolt 8 PCS Fig.22: Press the left roof cover of long side 1 (A5) onto the right roof cover of long side 1 (B5) as shown in Fig.
- Page 9 ALUMINUM HARDTOP GAZEBO ASSEMBLY INSTRUCTION Fig.24: Attach the roof covers C5, D5, E5, F5, H5, I5, J5, K5 to the top slanting bar (A2) with bolts (DD) & washers (BB). Fig.25: Press up the roof cover with the roof press sheet (N5), and fix N5 on the decorative beam with bolt (DD) &...
-
Page 10: Care And Maintenance
This can be prevented if the measure is taken to keep the product from oxidizing. CUSTOMER SERVICE Zenith Industries, LCC warrants to the original purchaser that this item is free from defects in work- manship and materials of your item provided the item was factory-sealed at the time of purchase and is maintained with care and used only for personal, residential purposes.