Advertisement
Table of Contents
- 1 Important Safety Rules
- 2 General Safety Rules
- 3 Specific Safety Rules
- 4 Pole Saw Names and Terms
- 5 Adjusting Chain Tension
- 6 Operating the Pole Saw
- 7 Connecting the Battery
- 8 Operating Position
- 9 Troubleshooting Section
- 10 Service Information
- 11 Full Two-Year Home Use Warranty
- Download this manual
Cordless Pole Saw
INSTRUCTION MANUAL
Catalog Number NPP2018
Thank you for choosing Black & Decker! Go to
www.BlackandDecker.com/NewOwner
to register your new product.
PLEASE READ BEFORE RETURNING
THIS PRODUCT FOR ANY REASON:
If you have a question or experience a problem
HTTP://WWW.BLACKANDDECKER.COM/INSTANTANSWERS
with your Black & Decker purchase, go to
for instant answers 24 hours a day.
If you can't find the answer or do not have access to the internet,
call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. -- Fri. to speak
with an agent. Please have the catalog number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPAÑOL EN LA CONTRAPORTADA.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y
POUR LE FRANÇAIS, VOIR LA COUVERTURE ARRIÈRE.
PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE
INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
1
Advertisement
Table of Contents
Related Manuals for Black & Decker NPP2018
Summary of Contents for Black & Decker NPP2018
- Page 1 Cordless Pole Saw INSTRUCTION MANUAL Catalog Number NPP2018 Thank you for choosing Black & Decker! Go to www.BlackandDecker.com/NewOwner to register your new product. PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY REASON: If you have a question or experience a problem HTTP://WWW.BLACKANDDECKER.COM/INSTANTANSWERS...
-
Page 2: Important Safety Rules
• Inspect tree before trimming. Make allowance for branches to fall freely to the ground. IMPORTANT SAFETY RULES WARNING: Read and understand all instructions. Failure to • Do not use your Pole Saw to fell saplings. While Operating Pole Saw follow all instructions listed below may result in electric shock, fire and/or serious personal injury. -
Page 3: General Safety Rules
- if Pole Saw is damaged, adjusted wrong, or not fully and guide bar may push the guide bar rapidly back towards the operator. securely assembled Either of these reactions may cause you to lose control of the saw which could result in serious injury to user. - if trigger does not turn Pole Saw on and off. -
Page 4: Specific Safety Rules
work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed Kickback Safety Features to filter out microscopic particles. Warning: The following features are included on your Pole Saw • Avoid prolonged contact with dust from power sanding, to help reduce the hazard of kickback;... - Page 5 Battery storage and carrying caps are provided for use whenever Battery Cap Information SAFETY WARNINGS AND the battery is out of the tool or charger. Remove cap before placing battery in charger or tool. INSTRUCTIONS Battery Cap CHARGING 1. This manual contains important safety and operating instructions. 2.
- Page 6 capacity than 18 gauge. When using more than one extension to make up the total length, be sure each extension contains at least IMPORTANT CHARGING SAFETY the minimum wire size. CHART FOR MINIMUM WIRE SIZE (AWG) OF EXTENSION CORDS INSTRUCTIONS NAMEPLATE RATING AMPS –...
-
Page 7: Pole Saw Names And Terms
LEAVING THE BATTERY PACK IN THE CHARGER +40°F(+4.5°C), or above +105°F (+40.5°C). This is important and will prevent serious damage to the battery pack. Longest life It is OK to leave battery packs on charge for long periods of time. The and best performance can be obtained if battery pack is charged charger has a maintenance mode which gives the battery pack when air temperature is about 75°F (24°C). - Page 8 Preparing Your Pole Trimmer for Use • Switch - A device that when operated will complete or interrupt an electrical power circuit to the motor of the chain saw. WARNING: Read and understand all instructions. Failure to • Switch Lockout - A movable stop that prevents the unintentional follow all instructions listed below may result in electric shock, fire operation of the switch until manually actuated.
-
Page 9: Adjusting Chain Tension
Chain Oiling • Place new chain in groove of guide bar and around sprocket. Make sure saw teeth are facing correct direction by matching arrow on • A high quality bar and chain oil or chain with graphic on housing shown here. SAE30 weight motor oil should be used for chain and bar lubrication. - Page 10 Assembly Joining Center Extension to Saw Head Module and Handle Module Joining Saw Head Module to 18V Handle Module Adding the extension (B) to the handle module (A) and saw head WARNING: Sharp moving blade. To prevent accidental module (C) creates a Pole Saw that is approximately 9 foot in length operation, insure that battery is disconnected from the handle as shown in figure 13.
-
Page 11: Operating The Pole Saw
Disassembly Switch Always be sure of your footing and grip the Detaching Saw Head Module Pole Saw firmly with both hands with the WARNING: Sharp moving blade. To prevent accidental thumb and fingers encircling the handle. operation, insure that battery is disconnected from the handle To turn the tool ON pull the lock button (1) and that the protective scabbard is in place on the chain before back with your thumb and then squeeze... -
Page 12: Operating Position
Pruning With the Pole Saw Pole Saw Trimming / Pruning Warning: When pruning trees: Warnings: • Guard Against Kickback which can result in • Never stand directly severe injury or death. See “KICKBACK”, under the limb you page 3 to avoid the risk of kickback. are cutting. -
Page 13: Troubleshooting Section
If you try to cut off thick branches from the bottom, the branch may Replacement chain and bar are available from your nearest Black & Accessories close in and pinch the saw chain Decker service center. in the cut. If you try to cut off thick Replacement chain # 623382-00, Replacement bar # 623381-00 branches from the top, without a The use of accessories not recommended in this manual may be... -
Page 14: Service Information
The second option is to take or send the product (prepaid) to a Black & Decker owned or authorized Service Center for repair or Problem Possible Cause Possible Solution Troubleshooting Section Con’t. replacement at our option. Proof of purchase may be required.Black &...