Power Sources - Canon Vistura Instruction Manual

Power Sources

Before operating your camera, you will need to use the power adapter to:
provide power from an AC outlet
or
charge a battery pack
Notes:
• The power adapter converts current from a household power outlet (100–240 V AC, 50–60 Hz) to the DC
current used by your camera.
• If the adapter is used next to a TV, it may cause the TV to emit noise — move the adapter away from the
TV or the antenna cable.
Connecting the camera to an AC outlet
1
Use the power adapter and the DC coupler to provide your camera with instant power from an AC outlet.
1. Insert the DC coupler in the camera's power source compartment.
• Insert the front end first, then press in the DC coupler until it clicks and locks into place.
2. Connect the DC coupler to the adapter.
3. Plug the adapter into an AC outlet.
4. Detach the DC coupler after use.
• Press and hold the BATTERY EJECT button while you pull the DC coupler outwards from the rear.
• Always turn the camera off before removing the power source.
3
2
E
4
9