Maintenance; Ec Declaration Of Conformity - Makita RP0910 Instruction Manual

Connecting to Makita vacuum cleaner or dust
collector (Fig. 15)
Cleaner operations can be performed by connecting the
router to Makita vacuum cleaner or dust collector.
Insert the nozzle assembly and the dust nozzle assembly
into the router. Also, the dust nozzle assembly can be
inserted into the router base directly in accordance with
the operation.
When connecting to Makita vacuum cleaner (Model 406/
431), an optional hose 28 mm in inner diameter is neces-
sary.
When connecting to Makita dust collector (Model 420S),
the optional hose is not necessary . You can connect the
router directly to the hose of the dust collector.

MAINTENANCE

CAUTION:
Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Replacement of carbon brushes
(Fig. 16 & 17)
Replace carbon brushes when they are worn down to the
limit mark. Both identical carbon brushes should be
replaced at the same time.
To maintain product safety and reliability, repairs, mainte-
nance or adjustment should be carried out by a Makita
Authorized Service Center.
Noise and Vibration of Model RP0910
The typical A-weighted sound pressure level is 82 dB (A).
The noise level under working may exceed 85 dB (A).
– Wear ear protection. –
The typical weighted root mean square acceleration
2
value is 5 m/s .
Noise and Vibration of Model RP1110C
The typical A-weighted sound pressure level is 80 dB (A).
The noise level under working may exceed 85 dB (A).
– Wear ear protection. –
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product
is in compliance with the following standards of standard-
ized documents,
HD400, EN50144, EN55014, EN61000
in accordance with Council Directives, 73/23/EEC,
89/336/EEC and 98/37/EC.
Yasuhiko Kanzaki
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes,
Bucks MK15 8JD, ENGLAND
2
.
CE 2003
Director
ENG004-1
ENG003-1
ENH001-1
9