Cisco PAP2T Datasheet page 4

© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Security
Provisioning, administration,
and maintenance
Physical interfaces
Subscriber line interface
circuit (SLIC)
Regulatory compliance
Power supply
Indicator lights/LED
Documentation
Environmental
Dimensions
W x H x D
Unit weight
Operating temp.
Storage temp.
Operating humidity
Storage humidity
Package Contents
● Cisco PAP2T Internet Phone Adapter with 2 VoIP Ports
● Power adapter
● RJ-45 Ethernet cable
● Quick installation guide
Product Warranty
1-year limited hardware warranty with return to factory replacement and 90-day limited software warranty
● Password-protected system reset to factory default
● Password-protected administrator and user access authority
● Provisioning/configuration/authentication:
● HTTPS with factory-installed client certificate
● HTTP digest - encrypted authentication via MD5 (RFC 1321)
● Up to 256-bit Advanced Encryption Standard (AES) encryption
● Web browser administration and configuration via integral web server
● Telephone keypad configuration with interactive voice prompts
● Automated provisioning and upgrade via HTTPS, HTTP, Trivial File Transfer Protocol
(TFTP)
● Asynchronous notification of upgrade availability via NOTIFY
● Nonintrusive, in-service upgrades
● Report generation and event logging
● Stats in BYE message
● Syslog and debug server records - per-line configurable web browser
● One 10BASE-T RJ-45 Ethernet port (IEEE 802.3)
● 2 RJ-11 FXS phone ports - for analog circuit telephone device (tip/ring)
● Ring voltage: 40–55 volts root mean square (Vrms) configurable *
● Ring frequency: 10–40 Hz *
● Ring waveform: trapezoidal and sinusoidal *
● Maximum ringer load: 3 ringer equivalence numbers (RENs)
● On-hook/off-hook characteristics:
On-hook voltage (tip/ring): -50V nominal
◦
Off-hook current: 25 mA min
◦
Terminating impedance: 8 configurable settings, including North America 600 ohms,
◦
European CTR21
FCC (Part 15, Class B), cUL, CE, IC-003, A-Tick
● DC input voltage: +5V DC at 2.0A max.
● Power consumption: 5W
● Switching type (100–240V) automatic
● Power adapter: 100–240V - 50–60 Hz (26–34 VA) AC input, 1.8 m cord
Phone1, Phone2, Internet, Power
● Quick-start installation and configuration guide
● User guide
● Administration guide - service providers only
● Provisioning guide - service providers only
3.98 x 3.98 x 1.10 in.
(101 x 101 x 28 mm)
5.40 oz (153 g)
32º to 113ºF (0º to 45ºC)
-77º to 158ºF (-25º to 70ºC)
10% to 90% noncondensing
10% to 90% noncondensing
Data Sheet
Page 4 of 5