Clock/Timers; Set Clock - JVC AV 36980 User Manual

SET CLOCK

The Clock is the heart of all timer
functions. The clock must be set
before the timer functions to work.
If you ran TV Guide Plus+ Setup, and
are receiving the TV Guide Plus+
signal, you cannot set the clock, TV
Guide Plus+ sets it for you.
To SET CLOCK
To operate
T I M E 1 2 : 3 4
S TART CLOCK
To set the hour (AM/PM)
To move to minutes
To set the minutes
To move to START CLOCK
when done with settings
To start the clock
THANK YOU ! !
Note: If you attempt to "Start Clock"
without setting the time you will
receive this message:
INCORRECT TIME
PLEASE TRY AGA I N
Note: You can only set the Clock
manually if TV Guide Plus+ is not
operating. TV Guide Plus+ sets the
clock for you, automatically, to the
correct local time.
C L O C K / T I M E R S
A M
Continued above...
Continued from below...
CLOCK — ON/OFF TIMER
MESSAGE
If you do not set the clock but attempt
to use the On/Off Ti m e r, you will get
the following message:
POWER INTERRUPTED
WOULD YOU SET CLOCK
F I R S T ?
Y E S
NO
To YES/NO
Choose YES
T I M E –– :– – – –
S TART CLOCK
Proceed to set the clock as in the
previous column.
If you choose NO, you will receive
the following message:
YOU CANNOT OPERAT E
ON/OFF TIMER !
7
3
NOTE:
You must have the
clock set to
operate the On/Off
Timer.