Vcr Codes - JVC I' Art Pro AV-32DF74 User Manual

Remote Programming

VCR Codes

The remote control is programmed with VCR codes for power on/off, play, stop, fast-forward,
rewind, pause, record, channel up/down operation.
1) Find the VCR brand from the list of codes shown below.
2) Slide the first 2-way selector switch to "TV" and the other 2-way selector switch to "VCR".
3) Press and hold down the D button, then enter the first code number listed with the 10
ISPLAY
key pad.
4) Release the D button, and confirm the operation of the VCR.
ISPLAY
• If your VCR does not respond to the first code, try the others listed. If it does not respond to
any of the codes, try the search codes function on page 25.
• After you program your remote, some VCR buttons may not work properly. If so, use the
VCR's remote.
• To record, hold down the R button on the remote and press P .
EC LAY
23