Download Print this page

About Prayer Time Calculation Methods; To Set The Time And Date; About The Timekeeping Mode Display - Casio 1044 Product Manual

Advertisement

• Whenever you change to another city code from a city code whose pre-programmed
data has been changed, the changed data is automatically reset to their initial
(unchanged) settings. You have to make the changes again if you wish to return to
the original city code.
• New settings that you make (using "_ _ _" as the city code) are stored in memory
until you change them. If you change from "_ _ _" to another city code, the settings
for "_ _ _" are retained.

2-2 About prayer time calculation methods

Methods that are used to determine prayer times (especially Fajr, Asr, and Isha) differ
somewhat between countries and regions. This watch comes with a total of seven
built-in prayer time calculation methods that conform with various geographical areas
around the world. In addition, you can also set your own calculation method for
calculation of Fajr, Asr, and Isha.
Prayer Time Calculation Methods
Type of Calculation
Methods
No.
FAJR ASR ISHA
18.0° - - 1 17.0° Europe, Turkey, Far East, etc.
1
2
18.0° - - 1 18.0° Kuwait, Iran, etc.
18.0° Afghanistan, Pakistan, India, Bangladesh, etc.
3
18.0° - - 2
4
19.0° - - 1 — 2 Saudi Arabia
19.5° - - 1 — 1 Bahrain, Qatar, Oman, UAE, etc.
5
6
20.0° - - 1 18.0° Africa, Lebanon, Jordan, Syria, Iraq, Yemen, continental United
States, Indonesia, Malaysia, Singapore, etc.
7
- - 1 - - 1 - - 1 England
15.0° - - 1 15.0° (User programmable)
0
1
• Numbers
through 7 are pre-programmed calculation methods, while 0 is reserved
for input of a user calculation method. These numbers are used to specify the
calculation method that you want.
• The degree values in the above table (such as: 18.0°) indicate the angle of sun below
1
the horizon. The values —
and —
FAJR - - 1 : 90 minutes before sunrise
2
120
:
minutes before sunrise
ASR
— 1 : Shadow length equal that produced by objects
- - 2
: Shadow length double that produced by objects
1
ISHA - -
: 90 minutes after sunset
2
: 90 minutes after sunset, and
The — 1 or — 2 setting of No. 0 can be changed when making its angle of sun
below the horizon settings.
• For the angle of sun below horizon values, one degree of angular differential is
equivalent to a time differential of approximately four minutes.
• At latitudes greater than 45° (north or south), this watch extrapolates Fajr and Isha
prayer times based on the proportion of night time, and predawn light/twilight at 45°
(north or south).
• This watch's pre-programmed prayer calculation methods were carefully selected to
provide the widest possible applicability. Note, however, that there are still other
calculation methods and variations.
To set a prayer calculation method
Important!
See "Prayer Time Calculation Methods" before making the following setting.
1. Press (A) while in the Timekeeping Mode. At this time,
Prayer time calculation
the currently set city code starts to flash on the display
method number
because it is selected.
2. Press © five times to advance to the prayer time
calculation setting screen. In this display, the prayer
time calculation method number is flashing.
©
Each time you press © , the display changes in the sequence noted below. If you
accidently go past the prayer time calculation method setting screen, use © to go
back through the sequence until it appears again.
GMT
differential
ISHA
ASR
Setting
Setting
• If you have already set a pre-programmed city code, the corresponding prayer time
calculation method number appears flashing on the display. Press © to check the
settings for FAJR, ASR, and ISHA. If they are correct, proceed with step 10 below. If
the settings are not correct, proceed with step 3 to change them.
3
. Press (B) to decrease the prayer time method number and (D) to increase it.
• If you want to use one of the pre-programmed prayer time calculation methods,
select its number and proceed with step
settings, select number 0 and proceed with step 4.
4. If you selected number 0 in step 3, press © to display
[ 0 ] FA JR
the FAJR setting screen.
Press (D).
5. Use (D) and (B) to change the FAJR setting within the
range shown in the illustration. Holding down either
button changes the setting at high speed.
• With the "15° - 20°" setting, you can make the setting in
units of 0.5 degrees.
Press (B).
6
. After you set the FAJR, press © to advance to the ASR
[ 0 ] ASR
setting.
7. Press (D) or (B) to switch the ASR setting between
1
"- -
" and "- -
Applicable Areas
2
have the following meanings.
120
minutes after sunset during Ramadan
Directional
Variation
FAJR
Calculation
Setting
Method Number
1
0 below. If you want to make your own
2
".
8
. After you set the ASR, press
V
[ 0 ] ISHA
setting.
Press (D)
9. Use (D) and (B) to change the ISHA setting within the
range shown in the illustration. Holding down either
20
1
2
button changes the setting at high speed.
15° -
°
- -
• With the "15° - 20°" setting, you can make the setting in
units of 0.5 degrees.
Press (B)
10
After you finish setting the prayer time calculation method, press (A) twice to return
.
to the Timekeeping Mode.

2-3 To set the time and date

1
Press
twice while in the Timekeeping Mode. The seconds digits start to flash on
.
(A)
the display because they are selected.
.
2
Press © to change the selection in the following sequence.
Seconds
Hour
Hijra
Hijra
Date
Month
AM indicator
Date
TYO
30- 6-1994
Seconds
Hour
Minutes
3. While the seconds digits are selected (flashing), press (D) to reset them to "00". If
you press (D) while the seconds count is in the range of 30 to 59, the seconds are
00
1
reset to "
" and
is added to the minutes. If the seconds count is in the range of
to 29, the minutes count is unchanged.
4. While any other setting (besides seconds) is selected (flashing), press (D) to
increase the setting or (B) to decrease it. Holding down either button changes the
setting at high speed.
• The digital time is always displayed in
5. After you set the time and date, press
• The day of the week is automatically set in accordance with the Gregorian Date
setting.
• The Gregorian Date can be set within the range of January
2029.
Important!
This watch uses a 30-day cycle to calculate the Hijra months. Because of this, the Hijra
date shown by this watch may differ from the actual date. When this happens, use
time/date setting procedure described above to change the date to its correct setting.
Also note that the watch uses midnight as the point for the change of date.

2-4 About the Timekeeping Mode display

You can switch the Timekeeping Mode display to show the Hijra date, Gregorian date,
or prayer times as illustrated below.
Day of week
Date Month
Year
Hold down ( B )
for 3 seconds.
30- 6 '94
[ Gregorian Date Display ]
Press
(B).
Gregorian date
Next prayer time
TH 30 11 :44
[ Prayer Time Display ]
Important!
• The date display (Hijra or Gregorian) you select here determines the format for the
date that appears in other modes. If you select the Hijra date display, for example,
the Hijra date format is used in the Prayer Time Mode as well. Note also that a Hijra
date indicator appears on the display while the Hijra date display is selected.
• Whenever the Prayer Time Display is selected, the next sequential prayer time (Fajr,
Zohr, Asr, Mgrib, Isha) is indicated on the display.
• AM and PM is not indicated on the Prayer Time Display.
• The next prayer time indicated on the Prayer Time Display changes one minute after
the indicated prayer time is reached.
• The next prayer time is indicated for the current date only. Because of this, the Isha
prayer time remains on the display even after Isha is passed. The next prayer time
will change to Fajr after midnight.
1044 1244-2
to advance to the ISHA
Gregorian
Minutes
Year
Gregorian
Gregorian
< —
Date
Month
Month
Hijra date Hiyra month
Year
HIJRA
21-MUHRM
12
-hour format.
(A)
to return to the Timekeeping Mode.
1
, 1990 to December 31,
Hijra date indicator
Hijra date
Hijra month
H IJ R A
TH 21-MUHRM
[ Hijra Date Display ]
(8
Press
Next prayer time
Hijra date
H IJR A
T H 21 11 : 44
[ Prayer Time Display ]
00

Advertisement

loading

This manual is also suitable for:

1244