Measurements For Djet 500 / 35" Version - Epson D-Jet 500 Installation Manual

Measurements for DJet 500 / 35" Version

5.3.4
First, line up the top cross section profile from the
left side as shown in the picture.
Tighten it firmly.
Then, position the second cross-profile as shown
(1275 mm from left side to left side of the profile).
Tighten it firmly.
DJet 300-500-700 – HW Installation Manual
Frame Assembly
Cross-Beam Profile
229 mm
tighten firmly only
on this side
195 mm
1275 mm
5
1275 mm
5-9