Setup For Input Signals; Component/Rgb-In Select; 3D Y/C Filter - For Ntsc Av Images - JVC GD-V501PCE Instructions Manual

Setup for Input Signals

Component/RGB-in Select

Select the input signals to be connected by installing the Optional Video Input Card.
(Refer to the service manual for the optional Video Input Card.)
Select to match the signals from the source connected to the Component/RGB input terminals.
Y, P , P signals
B R
R, G, B, HD, VD signals
INPUT
SURROUND
VOL
N
PICTURE SOUND SET UP
PICTURE
POS. /SIZE
ASPECT
3D Y/C Filter – For NTSC AV images
Select "Signal" from the "Setup" menu during AV(S Video) input signal
mode. ("Signal [AV]" menu is displayed.)
R
Note:
When On, this setting only affects NTSC input signals.
30
"Component"
"RGB"
1
2
R
Press to select the "3D Y/C Filter (NTSC)"
Press to set On/Off.
Press to exit from adjust mode.
SET UP
Press to display the Setup menu screen.
Press to select the "Component/RGB-in
Select".
Press to select the desired mode.
R
Press to exit from adjust mode.
Setup
Component/RGB-in select
RGB
Signal
Screensaver
English ( UK )
OSD Language
Set up TIMER
Component
Setup
Component/RGB-in select
RGB
Signal
Screensaver
English ( UK )
OSD Language
Set up TIMER
Press (ACTION) button
Signal
3D Y/C Filter ( NTSC )
On
Colour system Auto
3:2 Pulldown Off
Aspect Auto ( 4:3 )
4 : 3
RGB
[ AV ]