Video Adjustments; Adjusting The Screen Size And Position (For Rgb Input Only) - JVC GD-V4200PCE Instructions Manual

Video Adjustments

5 /
2 / 3 5
DISPLAY
VIDEO A
MUTING
MULTIPLE
MODE
MENU/EXIT
MENU/EXIT
14
MENU INPUT POWER
MENU INPUT POWER
MENU
ASPECT POWER
VIDEO B COMPO. RGB
VOLUME
MONITOR ADJUSTMENT
ID SET ID
RM-C575 REMOTE CONTROL UNIT
For video adjustments, use menus.
You can use the buttons either on the remote control or on
Monitor for menu operations.
• Refer also to "Menu Classifications" on pages 26 and 27.
Adjusting the Screen Size and Position
(For RGB input only)
While RGB input is selected, the screen size and position can
be adjusted.
Adjusted settings can be stored for each signal type; therefore,
when the same signal comes in, the stored settings are
recalled.
• When adjusting the size, the size cannot be adjusted
proportionally, but can be enlarged rightward (or
downward) only and reduced leftward (or upward) only.
Therefore, it is necessary to adjust both the size and position
alternately to adjust to the appropriate size.
1
Press MENU/EXIT (or MENU on the
Monitor) to display the Main Menu.
Cursor (3)
2
Press 5/∞ to move the cursor (3) to
"SIZE/POSITION ADJ."
3
Press 3 to display the Size/Position
Adjustment Menu.
4
Press 5/∞ to move the cursor (3) to the
item you want to adjust.
2 / 3
Item
5
5 /
H (horizontal) SIZE
H POSITION
V (vertical) SIZE
V POSITION
CLOCK PHASE*
sub menu
reset
* CLOCK PHASE can be used to reduce flickering and
blurring on the screen after adjusting the screen size.
M A I N M E N U
S I Z E / P O S I T I O N A D J .
P I C T U R E A D J .
F U N C T I O N S E L E C T
S T A T U S D I S P L A Y
E N T E R : S E L E C T : E X I T : M E N U
S I Z E / P O S I T I O N A D J .
H S I Z E : + 0 1
H P O S I T I O N : 0 0
V S I Z E : – 0 2
V P O S I T I O N : 0 0
C L O C K P H A S E : 0 0
s u b m e n u
r e s e t
A D J U S T : S E L E C T : E X I T :
M E N U
Adjustment range
–80 to +80
–80 to +80
–80 to +80
–80 to +80
–20 to +20
See "To make an adjustment
while viewing the adjustment
bar" on the next page.
See "To reset the adjustments" on
the next page.