Advertisement
16. Install the suction hose.
POSITIVE
BATTERY
CABLE
Attach the
harness return clip
(91550-ST5-003)
to the
positive
battery
cable
and to the
receiver line.
RECEIVER LINE
2001 American Honda Motor Co., Inc. -- All Rights Reserved
Install the A/C line clamp
(91555-S84-A01)
between the suction hose
and the receiver line.
RECEIVER
LINE
Route the suction hose
under the radiator hose.
AII 22912 (0109)
Reattach this wire harness
clip to the bracket.
SUCTION
HOSE
Install the suction line clamp
(80365-S84-A00) on the suction
hose, then secure the clamp to
the bracket with a 6 x 16 mm
washer-bolt (93403-06016-08).
Apply a few drops of refrigerant
oil to this fitting, then loosely
install the suction hose to the
evaporator. Do not tighten the
fitting at this time.
.
Torque the fitting to 33 N
m
(24 lb-ft). Make sure you use a
second wrench to hold the
other fitting.
Install suction
line clamp A
(80364-S84-A00)
on the suction hose.
Secure suction line
clamp A with a
6 x 20 mm
washer-bolt
(93403-06020-08).
13 of 16
Advertisement
