Table of Contents
Advertisement
Configure DI-P i lot Output Manager
4
Tab „Settings"
Tab „Settings"
4.2
4.2.1 Setting – Paper Reservoir Handling
Parameter name
LoadPaper
Reservoir Min / Max
Leading white space for
front /back adjustment
4-2
Function
Paper length for the "Load Paper" job and the "Output Now" job.
The length is set automatically by the "Load Paper Job" (JobLoad_Txk_1650.prn)
Minimum and maximum Length of the Paper Reservoir
(Paper Reservoir = Paper between Camera 1 and Camera 2)
Recommended values are: Min = 700 mm, Max = 1400 mm
Change the values only after contacting the technical support of DI
Set to 150mm
Installation Manual – Configuration DJet Software
Advertisement
Table of Contents
