AUTO TIMER
Display keyset users may have the timer automatically start when they
answer incoming calls or after a short delay on an outgoing call.
•
With the handset on-hook, press TRSF and then dial 110.
•
Dial 11 to turn the auto timer on or 10 to turn it off.
•
Press TRSF to store your selection.
TIMER FUNCTION
Display keyset users may use this feature as a simple stopwatch.
•
When the keyset is idle, press the TIMER button to start timing.
•
Press the TIMER button again to stop timing.
•
Read the elapsed time in the display.
•
Lift the handset and replace it. The display will return to date and time.
VIEWING MESSAGE INDICATIONS
You can view all of your message indications before you return them:
•
With the handset on-hook, press the MSG key with the red flashing light.
•
The first station that left a message indication will be displayed.
•
Press the UP and DOWN arrows to scroll through the stations that left
message indications. Use the soft keys to reply, clear or advance to the
next message.
•
Press the ANS/RLS key to return your keyset to the idle condition.
ALARM REMINDER MESSAGES
When you use the alarm/appointment reminder feature, you create a 16
character reminder message. When the alarm rings, your message will ap-
pear instead of [ALARM REMINDER]. To program reminder messages:
•
Press TRANSFER and then dial 116.
•
Dial the alarm number 1 or 2.
•
Dial the time you want the alarm to go off. Enter the time as HHMM
(hours and minutes) using the 24 hour clock.
•
Dial 0 (NOT SET), 1 (TODAY) or 2 (DAILY) to select the alarm type.
•
Write your message using the dial pad keys. Each press of a key selects
a character. Pressing the next key moves the cursor to the next position.
For example, if your message is "TAKE MEDICATION," press 8 once to
get the letter "T." Press 2 once to get "A." Press 5 twice to get "K." Con-
tinue selecting characters from the following table to complete your
message.
•
Press the TRANSFER key to store the alarm and reminder message.
•
Repeat for each alarm if needed.
35