Compu Link Connection - JVC XL-FZ158BK Instructions Manual

BEFORE USING FOR THE FIRST TIME

COMPU LINK connection

JVC's COMPU LINK Remote Control System provides unified control
over system components connected with COMPU LINK. Connecting
JVC audio components with the COMPU LINK jacks automatically
controls relative operations between components and facilitates various
operations. With the COMPU LINK connection to an amplifier or re-
ceiver, you can operate XL-FZ258BK/XL-FZ158BK with the amplifier or
receiver's remote control unit. Synchronized recording is also available
with this feature.
Connecting the COMPU LINK cord
The COMPU LINK-3 SYNCHRO jacks are used to output and input the
control signal for the COMPU LINK remote control system.
COMPU LINK-compatible products are provided with the jacks marked
COMPU LINK-1, COMPU LINK-2 or COMPU LINK-3, referring to the
COMPU LINK version. XL-FZ258BK/XL-FZ158BK is equipped with
COMPU LINK-3. You can connect XL-FZ258BK/XL-FZ158BK also to a
component with lower COMPU LINK versions. But, in that case, only the
lower versions' features will be available.
Plug the supplied COMPU LINK cord into the COMPU LINK-3 SYNCHRO
jack on the rear panel of XL-FZ258BK/XL-FZ158BK. Plug the other end
into the COMPU LINK jack of the other component. If there are two
COMPU LINK jacks, plug it into either of them.
Connect to the COMPU LINK-3 (SYNCHRO) jack of another compo-
nent eqipped with the Compu Link remote control system.
Rear panel of this unit
AC IN
DIGITAL OUT
OPTICAL
COMPU LINK - 3
OUTPUT (SYNCHRO)
RIGHT LEFT
Supplied COMPU LINK cord
Turntable
Cassette deck
Amplifier or receiver
Page 6