More About This Receiver - JVC LVT1134-001A Instructions Manual

More about This Receiver

Basic Operations
General
• The clock in the "BACK" icon on the screen
works as the time countdown indicator. If no
operation is done for a certain period of time,
the current screen goes off, and the source
operation screen resumes.
Selecting the source
• If a disc is not loaded, you cannot select
"CD" for the playback source.
• Without connecting the CD changer, you
cannot select "CD-CH (CD changer)" for the
playback source.
• To select the external component for the
playback source, set the "Ext Input" setting
correctly (page 31).
Turning off the power
• If you turn off the power while listening to a
disc, disc play will start from where playback
has been stopped previously, next time you
turn on the power.
Tuner Operations
Storing stations in memory
• When SSM is carried out for a band...
– All stations previously stored for the band
are erased and stations are stored newly.
– Received stations are preset in the number
buttons No.1 (lowest frequency) to No.6
(highest frequency). When SSM is over, the
station stored in number button 1 will be
automatically tuned in.
• When storing a station manually, a previously
preset station is erased when a new station is
stored in the same preset number.
• Preset stations are erased when the power
supply to the memory circuit is interrupted
(for example, during battery replacement). If
this occurs, preset the stations again.
46
Basic Disc Operations
General
• This unit has been designed to reproduce
CDs/CD Texts, and CD-Rs (Recordable)/
CD-RWs (Rewritable) in both audio and
MP3/WMA formats.
• The unit cannot read or play an MP3 track
without the extension code <mp3>, and a
WMA track without the extension code
<wma>.
• When a disc has been already loaded,
selecting "CD" for the playback source starts
disc play.
Inserting a disc
• When a disc is inserted upside down, the disc
automatically ejects.
• If you keep the control panel open for about 1
minute, the control panel returns to its
previous position.
Playing a disc
• While playing an audio CD: If a title has been
assigned to the audio CD (see page 35), it
will be shown on the display.
• While fast-forwarding or reversing on an
MP3 or WMA disc, you can only hear
intermittent sounds. (The elapsed playing
time also changes intermittently on the
display.)