Table of Contents
Advertisement
To stop play and eject the CD
Press 0.
CD play stops and the control panel flips down.
The CD automatically ejects from the loading
slot. The source changes to the previously
selected source.
• If you change the source, CD play also stops
(without ejecting the CD).
Next time you select "CD" as the source, CD
play starts from where playback has been
stopped previously.
Notes:
• If the ejected CD is not removed for about 15
seconds, the CD is automatically inserted again
into the loading slot to protect it from dust.
(CD play will not start this time.)
• You can eject the CD even when the unit is turned
off.
Locating a track or a
particular portion on a CD
To fast-forward or reverse the track
Press and hold ¢
playing a CD, to fast-forward
the track.
4, while playing a CD, to
Press and hold
reverse the track.
To go to the next or previous tracks
Press ¢
playing a CD, to go ahead to
the beginning of the next
track.
Each time you press the
button consecutively, the
beginning of the next tracks is
located and played back.
4 briefly, while playing a CD, to go
Press
back to the beginning of the current track.
Each time you press the button consecutively,
the beginning of the previous tracks is located
and played back.
To go to a particular track directly
Press the number button corresponding to the
track number to start its playback.
• To select a track number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
• To select a track number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than
one second.
, while
briefly, while
15
Advertisement
Table of Contents
