Service Menu Settings; Display Menu - Hitachi 42PMA225EZ Service Manual

10. SERVICE MENU SETTINGS

All system, geometry and white balance alignments are performed in production service mode. Before
starting the production mode alignments, make sure that all manual adjustments are done correctly. To
start production mode alignments enter the MENU by pressing "M" button and then press the buttons
Mute, Dual, Wide and Red respectively. The following menu appears on the screen.
blank color
panel
power on time
backlight on time
scart prescale
nicam prescale
There are 3 submenus in service menu. These are display, calibration and deinterlacer menus.
Press "◄/►" buttons to select a menu title and then "▲/▼" buttons to select a menu item and "◄/►"
or "OK" buttons to set the menu item to the desired option. To exit the service menu press "M" button.
Entire service menu parameters of Plasma TV are listed below.

10.1. display menu

By pressing "◄/►" buttons select the first icon. display menu appears on the screen.
blank color
panel
power on time
backlight on time
scart prescale
nicam prescale
blank colour
By pressing '' / '' button, select blank colour. Press '' / '' button to set the blank colour. The
options are: black, red, green and blue.
panel
Displays panel resolution
power on time
Displays total working time of the set
backlight on time
Displays total backlight on time of the set. (Not used for plasma displays)
Plasma TV Service Manual
display
black
Vestel V1.0.10 Release Build
down to change display settings
display
black
Vestel V1.0.10 Release Build
down to change display settings
green blue
red
0 852x480
33:5
33:0
25
32
green blue
red
0 852x480
33:5
33:0
25
32
33
11/01/2005